Waterproof garden lights resistant to rain and humidity – Buy from manufacturer Takshidfam
-

چراغ باغی ویکتوریا کمرباریک (1)
-

چراغ باغی ویکتوریا خمرهای (1)
-

چراغ باغی ویکتوریا (1)
-

چراغ باغی ویکتور (1)
-

چراغ باغی ویسپر (1)
-

چراغ باغی ویدا (1)
-

چراغ باغی وستا کوچیک (1)
-

چراغ باغی وستا بزرگ (1)
-

چراغ باغی نیکا (3)
-

چراغ باغی مهرگان (1)
-

چراغ باغی معبد ویسپر (1)
-

چراغ باغی معبد سورنا کوتاه طرح دار (1)
-

چراغ باغی معبد سورنا کوتاه (1)
-

چراغ باغی معبد سورنا بلند طرح دار (1)
-

چراغ باغی معبد سورنا بلند (1)
-

چراغ باغی معبد سورن کوتاه طرح دار (1)
-

چراغ باغی معبد سورن کوتاه (1)
-

چراغ باغی معبد سورن بلند طرح دار (1)
-

چراغ باغی معبد سورن بلند (1)
-

چراغ باغی معبد رابو کمرباریک (1)
-

چراغ باغی معبد رابو خمرهای (1)
-

چراغ باغی معبد رابو (1)
-

چراغ باغی کلبه (6)
-

چراغ باغی کارن (2)
-

چراغ باغی سورنا کوتاه طرح دار (1)
-

چراغ باغی سورنا کوتاه (1)
-

چراغ باغی سورنا بلند طرح دار (1)
-

چراغ باغی سورنا بلند (1)
-

چراغ باغی سورن کوتاه طرح دار (1)
-

چراغ باغی سورن کوتاه (1)
-

چراغ باغی سورن بلند طرح دار (1)
-

چراغ باغی سورن بلند (1)
-

چراغ باغی روبینا (1)
-

چراغ باغی رابو کمرباریک (1)
-

چراغ باغی رابو خمرهای (1)
-

چراغ باغی رابو (1)
-

چراغ باغی پالیز (1)
-

چراغ باغی پادینا طرحدار (1)
-

چراغ باغی پادینا (1)
-

چراغ باغی پادرا (1)
-

چراغ باغی آیسان (4)
-

چراغ باغی آرمیتا (4)
-

چراغ باغی آرتمیس (4)
-

چراغ باغی آرامیس (4)
This product is right for anyone who wants their yard or green-space lighting to withstand rain, humidity and temperature changes for years. Takshidfam products, with die-cast aluminum bodies, UV-protected polycarbonate diffusers and oven-baked electrostatic paint, are supplied directly from the factory.
A garden light that isn’t water-resistant rusts after a few seasons, its paint peels and it creates a risk of electric shock. An IP56 rating or higher means the light is fully protected against direct rain and high humidity, making it a reliable option for the country’s rainy regions.

Technical features of Takshidfam waterproof garden lights
01 — Rust-resistant die-cast aluminum body
Compared to iron and plastic, a die-cast aluminum body is lighter, stronger and rust-proof. This is why Takshidfam waterproof garden lights work for years without repairs or replacement, even in high-humidity regions such as northern Iran.
02 — IP56 rating for full water resistance
IP stands for Ingress Protection and shows how well a light resists water and dust. Outdoor spaces need at least IP44, but for gardens, yards and rainy regions IP56 or higher is recommended. All Takshidfam waterproof products meet this standard.
03 — UV-protected polycarbonate diffuser
The UV-protected polycarbonate diffuser resists yellowing and brittleness caused by direct sunlight and keeps the light clear for years, unaffected by humidity or ultraviolet rays.
04 — Design in classic and modern styles
These lights are produced in two styles: classic for villas and traditional gardens, and modern for stylish, minimal grounds. Both styles are produced to the same die-cast aluminum and oven-baked paint standards.
Guide to buying the right waterproof garden light
Before buying a waterproof light for your garden, check the IP protection rating. For ordinary outdoor spaces at least IP44 is enough, but for areas with heavy rainfall or near the sea, IP56 or higher is the safer option. Also check the body material; die-cast aluminum is far more resistant to corrosion and rust than iron or plastic.
Buying directly from the manufacturer cuts out the middleman so you pay a lower price. All Takshidfam products come with a quality guarantee and delivery across Iran. To see other models, visit the buy affordable garden lights page. Die-cast aluminum is one of the standard production methods in the global lighting industry.
Buy this product with a quality guarantee and delivery across Iran
How to read the IP code?
The word “waterproof” on its own says nothing precise; what defines the level of protection of a waterproof garden light is the IP code, which consists of two digits, each with its own meaning.
- First digit (0 to 6): protection against solid objects and dust. 4 means objects larger than about one millimeter can’t get in, and 6 means the body is completely dust-tight.
- Second digit (0 to 9): protection against water. 4 means splashing water from any direction, 5 and 6 mean lower- and higher-pressure water jets, and 7 and above mean immersion.
- Example: IP44 is for places with only splashing rain; IP65 means the body is dust-tight and also withstands direct water jets.
A higher number isn’t always necessary. A waterproof garden light is not meant to go underwater, so an immersion rating isn’t needed, but it must withstand slanting rain, lawn sprinklers and hose washing. The installation location is decisive: under a canopy, fully in the open or near a pool.
Where does water get into a waterproof garden light?
Experience shows that moisture-related failure has less to do with the body and more to do with a few specific points. If you know these points, you’ll look more carefully both when buying a waterproof garden light and when installing it.
- Where the diffuser sits on the body: if the gasket sits crooked, has dried out or the screws aren’t tightened evenly, water finds its way through this seam.
- Cable entry: the hole through which the cable enters a waterproof garden light acts like a funnel if it doesn’t have a proper gland.
- Inside the post: in post models, water can rise from below and through the cable conduit, especially if water collects at the foot of the light.
- Internal condensation: warm air inside cools and contracts after switching off, drawing moist outside air in; tiny droplets behind the diffuser of a waterproof garden light often come from this phenomenon, not from a leak.
- Screws and caps: every extra hole in the body is a new entry point.
Gaskets, glands and drainage
Three small components create the sealing of every waterproof garden light. The rubber or silicone gasket must stay soft and intact and sit fully in its groove. The gland must match the cable diameter so it closes completely around it. And drainage means that any water that has entered the post for whatever reason has a way out and doesn’t stay around the base.
Installation that preserves the seal
Even the best waterproof garden light will let water in if it is installed badly. These simple steps during installation keep the factory seal intact:
- After opening the diffuser to fit the lamp, seat the gasket in place and tighten the screws in a cross pattern and evenly; overtightening crushes the gasket too.
- Use round cable with a diameter matching the gland, and never pass two cables through one gland.
- Before entering the waterproof garden light, the cable should loop slightly below the entry so drops fall from the lowest point instead of creeping along the cable inside.
- Make underground connections only in a waterproof joint or junction box; most short circuits come from this point, not from the light itself.
- Don’t drill the body of a waterproof garden light to pass wires or fit extra parts.
- Lay a bed of gravel under the post and set the foundation slightly above the soil so water doesn’t stand at the foot of the light.
- Adjust sprinklers so their direct jets don’t hit the waterproof garden light.
What difference do humid, coastal and rainy climates make?
In humid regions such as northern Iran, the main issue isn’t occasional rain; it’s constant air humidity. A waterproof garden light in such a climate deals mostly with internal condensation, moss and deposits on the diffuser. Periodically opening and drying the light and keeping the gaskets in good condition are doubly important in these regions.
On the coast, salt is added to the mix. Salt particles carried by the wind settle on the body and screws, and any paint scratch becomes a starting point for corrosion. For a waterproof garden light at a coastal villa, an intact paint coating, stainless screws and periodic rinsing with fresh water are the three principles of maintenance.
In cold, snowy regions, you must also consider water freezing in seams and the weight of snow on short models. Before winter, make sure water doesn’t collect anywhere in the waterproof garden light or at its foot.
Cleaning and periodic inspection
Maintaining a waterproof garden light doesn’t take much time; one inspection at the start of autumn and one at the end of winter is usually enough.
- Wash the body and diffuser with water, mild detergent and a soft cloth; strong solvents and high-pressure washers at close range damage the gaskets.
- Touch the gasket: if it is dry, cracked or flattened, it’s time to replace it.
- Check the screws and the cable gland and retighten them if they are loose.
- If you see persistent mist or droplets inside the diffuser of a waterproof garden light, open and dry it and find the source of entry.
- Touch up paint scratches promptly so corrosion doesn’t spread under the coating.
- Clear leaves and soil collected around the base so drainage isn’t blocked.
Gaskets and diffusers are consumable parts of every waterproof garden light and sooner or later need replacing. Takshidfam guarantees spare parts supply for up to 10 years, and its products carry an 18-month warranty.
See short and tall models on the garden and lawn lights page and villa options in the villa lights section. To choose a waterproof garden light, discuss your installation conditions with Takshidfam’s experts.
Frequently asked questions about waterproof garden lights
For outdoor use at least IP44 is recommended, and IP56 for rainy regions.
Yes, die-cast aluminum with oven-baked electrostatic paint is fully resistant to humidity and rain and does not rust.
Yes, thanks to their aluminum bodies and UV-protected polycarbonate diffusers, Takshidfam products are fully suitable for humid regions such as northern Iran.
Just call our sales experts or place your order directly from this page.
With die-cast aluminum bodies and oven-baked electrostatic paint, these products usually last more than 10 years without needing replacement.
Yes, electrostatic painting makes it possible to produce in various colors to order.













































