Tall-Pole Area Light Price | Die-Cast Aluminum, Direct from Manufacturer Takshidfam
The price of a tall-pole area light depends on the body material, pole height, design style and production method. Takshidfam products, with die-cast aluminum bodies, UV-protected polycarbonate globes and electrostatic powder coating, are supplied directly from the factory with no middlemen. If you are looking for a quality product at a fair price for your grounds, this page is for you.
The price of this product depends on several key factors. First, the body material — die-cast aluminum costs more than iron and plastic but lasts several times longer and is more economical in the long run. Second, pole height — the taller the pole, the more material is used and the higher the price. Third, design style — classic models with more ornamentation usually cost more than modern models. Finally, the purchase method — buying directly from the manufacturer lowers the price considerably.
Factors Affecting the Price of Tall-Pole Area Lights
01 — Which spaces are tall-pole area lights suitable for?
This type of product suits spaces that need lighting from a greater height. Large grounds such as parking lots, residential complex entrances, wide green spaces, long walkways and large gardens are among them. A tall pole spreads light from a greater height and lights a larger area with fewer fixtures.
02 — Price of die-cast aluminum tall-pole area lights compared with iron
Many people think an iron product is cheaper and therefore better. The reality is that after a few years it rusts, its paint peels and it needs replacing. In contrast, a die-cast aluminum product with powder coating lasts more than 10 years without repair. In the long run you pay less.
03 — Price difference between classic and modern tall-pole area lights
Classic models usually cost slightly more than modern ones because of their more ornate and complex designs. But both styles are made with the same die-cast aluminum quality, UV-protected polycarbonate globes and powder coating, and have the same durability. The choice between classic and modern depends more on the architectural style of your grounds than on price.
04 — UV-protected polycarbonate globe
A UV-protected polycarbonate globe resists the yellowing and brittleness caused by direct sunlight and keeps light transmission clear for years, unaffected by humidity or ultraviolet radiation.
Tall-Pole Area Light Price from the Manufacturer
Buying directly from the manufacturer removes the middleman, so you get the same product at the same quality for a lower price. You can also get direct advice, order in your preferred color and have the pole height adjusted to your needs. Contact us now for an exact quote and free consultation.
To see other models, visit the villa lights page. For other lighting products, visit the Takshidfam home page.
Price Inquiry with Free Consultation and Factory Prices
What makes up the price of a tall-pole area light?
Two poles that look alike in photos can be far apart on a quotation. The reason is that the price of a tall-pole area light is the sum of several independent components, each of which rises or falls with your choices. Knowing these components helps you decide where to spend and where you can save.
The pole: height, diameter and thickness
The largest share of raw material is in the pole itself. As a pole gets taller, it is not only length that is added; to keep it from swaying in the wind, its diameter, wall thickness and base plate dimensions must also increase. So the relationship between height and the price of a tall-pole area light is not linear, and each step up in height is a bigger jump than the last. Choose the height the space actually needs, no more.
Number of arms and light heads
Single-arm, double-arm or multi-arm poles look like one product, but each arm means one more arm bracket, light head, globe and light source. In wide spaces, one multi-arm pole can sometimes replace two single-arm poles and eliminate a foundation and a cable run. So do not look at the price of a tall-pole area light separately from the total project cost.
Body, coating, globe and light source
- Material and manufacturing method: die-cast aluminum parts require molds, and more decorative detail means more weight and work; modern model bodies usually have simpler, lighter forms.
- Coating: powder coating with proper surface preparation is a cost that pays back in paint durability. Special colors outside the production program usually affect the price of a tall-pole area light.
- Globe or diffuser: UV-resistant polycarbonate and glass each have their own cost and behavior; the size and shape of the globe also matter.
- Light source: in models with an E27 socket the lamp is replaceable and may be priced separately, while in integrated LED models the light source and driver are part of the fixture.
Order quantity and customization
In production, higher quantities spread the cost of line setup, painting and packaging over more units; that is why the price of a tall-pole area light on a project order can differ from a single purchase. On the other hand, changing the height, color or dimensions from the standard model requires separate work. If your budget is limited, stay as close as possible to current models and colors.
Costs not on the price list
The figure you get from the factory is the price of the product itself. For accurate budgeting, alongside the price of a tall-pole area light, account for several installation items whose total is sometimes significant:
- Foundation: excavation, concrete, rebar and anchor bolts; the taller the pole and the windier the area, the larger the foundation needed.
- Cable and conduit: underground cable, protective conduit, trenching and paving repair. The distance from the panel to the farthest pole determines this figure.
- Panel equipment: miniature circuit breakers, residual current device, photocell or timer, and earthing.
- Transport and installation: freight to the project site, installer wages and, at greater heights, a lift or light crane.
- Lamp: if the chosen model has an E27 socket, ask whether the lamp is included or must be bought separately.
Ask your electrical and landscaping contractor to estimate these items separately from the price of the tall-pole area light, so that when comparing two offers you are sure you are comparing like with like.
How to get an accurate quote and use the price list
Takshidfam’s up-to-date price list is available as a PDF on the catalog and price list page. The list is useful for initial estimates and comparing models, but for project orders or custom models you need a separate quote. When reading the list, note the following:
- Write down the model name or code and its height exactly; one design may come in several heights and with different numbers of arms.
- Check whether the listed figure covers the complete pole or whether the light head and pole are priced separately.
- Look at the list’s date; as raw material prices fluctuate, the price of a tall-pole area light is updated too.
For a quote, send this information via the contact page, by phone or WhatsApp: the model or a photo of the desired design, height, number of arms, total quantity, body color, light source type and destination city. The more complete this list, the more accurate the price of the tall-pole area light and the less back-and-forth needed.
If you are still undecided between several heights or styles, also look at the park light models; in larger grounds the line between these two families is close, and comparing them helps you make a more economical choice.
Lifetime cost: buying cheap or ending up cheap?
A light pole stays on the grounds for years. If you look only at the price of a tall-pole area light, the costs of later years are overlooked: repainting a rusted pole, replacing a yellowed globe, the electricity bill of a power-hungry lamp and the labor of every service visit.
A simple calculation helps: add the purchase and installation price to the electricity and maintenance costs over the years of operation and divide by the number of years. In this calculation, the price of a tall-pole area light with a corrosion-resistant body and an energy-efficient light source often comes out lower than the option that was cheaper on day one.
Access to spare parts is also part of this calculation. Takshidfam’s 18-month warranty and guaranteed parts supply for up to 10 years mean that if a globe or arm is damaged, you do not need to buy the whole pole again. When comparing the price of a tall-pole area light among several sellers, put this commitment on the scale too.
Read the quotation line by line
When several offers arrive, the first temptation is to look at the grand total. But the price of a tall-pole area light on two quotations is only comparable when the lines above it describe the same thing. Place the quotations side by side and match these rows one by one:
- Item description: the model name, full height from ground to top of the fixture and number of arms must be stated explicitly. A general phrase like “yard light pole” commits to nothing.
- Scope of supply: pole, arm, light head, globe, socket or light source, internal pole wiring, bolts and mounting plate; which are included in the price and which are not?
- Material and coating: the body and pole material, coating method and chosen color should be on the quotation itself, not just in a phone conversation.
- Unit and quantity: is the price per unit or per arm? Does the quantity match your plan?
- Tax and transport: are tax, packaging and freight to the project site listed separately or included in the figure?
- Validity and payment: until what date is the quotation valid, and in how many stages is payment made?
- After-sales commitments: the warranty period and spare-parts status should be in writing.
If a line appears on one quotation and not the other, ask that seller to add it before judging. Differences in the price of a tall-pole area light between two offers most often come from these missing lines.
Cost-of-ownership log: four columns for the years of operation
To take the comparison of tall-pole area light prices out of guesswork, build a simple four-column table for each option and fill it in yourself. Take the figures from your electricity bill, your contractor and the experience of similar grounds; no ready-made formula replaces the conditions of your project.
- Energy: the wattage of each pole, nightly lighting hours and the number of nights per year. A photocell and switching off some circuits late at night shrink this column.
- Lamp and light source: how often is replacement needed, and do you need a ladder, scaffolding or lift to reach the top of the pole? At great heights, the labor and access equipment sometimes cost more than the lamp itself.
- Coating and body: in most climates an iron pole needs rust removal and repainting after a few years; record this as a periodic cost. For powder-coated aluminum, this row is usually limited to touch-ups.
- Spare parts: globes, gaskets and sockets are consumables. If a part cannot be found, the cost in this column equals buying a complete unit.
Once the table is filled in, the price of the tall-pole area light on the day of purchase will be only one of five numbers. Takshidfam’s commitment to parts supply for up to 10 years and its 18-month warranty make the last column predictable.
Savings that end up costly
Cutting costs is not always bad, but there are a few places where lowering the price of a tall-pole area light directly reduces its lifespan and safety:
- Thin walls: a pole made light to be cheaper sways in the wind, bends at the first bumper impact and its arm joints loosen.
- Poor coating: paint without surface preparation looks fine in the first year and then flakes; repainting on site never matches the quality of powder coating.
- Small foundation: skimping on concrete and bolts turns a tall pole into a lever that strains the foundation with every gust. A leaning pole is ugly at best and dangerous at worst.
- Low-grade globe: a globe that yellows and becomes brittle in the sun both reduces light and, when it breaks, lets water reach the socket.
- Ordinary screws and fittings: a few rusted screws are enough to turn a simple lamp change into cutting and drilling.
If the budget is tight, reduce the quantity or height, not the build quality. Two fewer poles can be added next year, but a weak pole can only be discarded. Seen this way, the price of tall-pole area lights should be weighed against their years of service.
Phased purchasing, order quantity and customization
How to phase the purchase?
On large grounds, installation can be done in two or three phases, provided that the conduits and foundations for the entire plan are built at once. First equip the entrance, main road and parking, and leave low-traffic areas for the next phase. When requesting a quote, ask for both the price of tall-pole area lights for the first phase and an estimate for the whole plan, and ask whether the same model and color will be produced in later phases.
Raw material prices do not stay fixed, and the price of a tall-pole area light in the second phase may differ from the first. If you have secure covered storage, it is sometimes more sensible to buy all the poles at once and install them gradually.
The effect of model variety and spare units
A wide variety of models in one project breaks the order into several small batches and loses the quantity advantage. If instead of four different designs you choose one design in two heights, the price of the tall-pole area light comes out more reasonable and the parts inventory becomes simpler. Also include a few extra units for future replacement in the first order; producing a single unit in a special color in later years is not economical.
Regarding customization, ask yourself which change will actually be seen. A color matched to the façade or a height suited to the internal road width is worth the cost; a minor change to a part not visible from a distance is not. Takshidfam customizes model, color and dimensions for projects, and you can ask about the effect of each change on the price of the tall-pole area light before deciding.
Questions to ask before paying
A few minutes of conversation before transferring money prevents weeks of follow-up later. Keep this list at hand:
- Will the price of the tall-pole area light stay fixed until delivery, or is it updated as material prices change?
- When will the order be ready, and what happens if it is late?
- Is the packaging suitable for long-distance transport, and who is responsible for damage in transit?
- Will you provide the base plate dimensions and bolt layout before delivery so the foundation can be prepared?
- What does the warranty cover, and what documents are needed to use it?
- If I need a globe or arm a few years from now, where and how do I order it?
- Can I see a sample up close before a bulk order?
- Is an official invoice issued?
A seller who answers these questions clearly and in writing usually behaves the same way at delivery. To start, get the current list from the catalog page and browse the models on the products page. Then request the price of tall-pole area lights for your quantity and height via the contact page.
Frequently Asked Questions about Tall-Pole Area Light Prices
The price depends on the model, pole height and design style. For an exact price and free consultation, contact us or visit the products page of the website. We are ready to give you the best offer based on your needs and budget.
The height is usually between 1.2 and 3 meters. The right height depends on the size of the grounds, the spacing between fixtures and the amount of light needed. As the manufacturer, we can produce your desired height.
Our products, with die-cast aluminum bodies and electrostatic powder coating, last more than 10 years under normal conditions. They do not rust, their paint does not peel, and they are fully resistant to humidity and temperature changes.
Yes, as the manufacturer we can produce the product in your desired height and color. With electrostatic powder coating, any color you want can be produced. Specify your desired height and color when ordering.
Not necessarily. By buying directly from the manufacturer, you can get a quality die-cast aluminum product at a better price than the market. Cheaper means removing the middleman, not lowering quality.
Yes, we ship to all parts of Iran. Contact us for shipping costs and times.





