Buy Garden and Villa Area Lights | Die-Cast Aluminum, Direct from Manufacturer Takshidfam
-

چراغ ویلایی ویکتوریا کمرباریک (6)
-

چراغ ویلایی ویکتوریا خمرهای (6)
-

چراغ ویلایی ویکتوریا (6)
-

چراغ ویلایی ویکتور (6)
-

چراغ ویلایی ویسپر (6)
-

چراغ ویلایی ویدا (2)
-

چراغ ویلایی وستا کوچیک (6)
-

چراغ ویلایی وستا بزرگ (5)
-

چراغ ویلایی مهرگان (6)
-

چراغ ویلایی معبد ویسپر (6)
-

چراغ ویلایی معبد سورنا کوتاه طرحدار (6)
-

چراغ ویلایی معبد سورنا کوتاه (6)
-

چراغ ویلایی معبد سورنا بلند طرحدار (6)
-

چراغ ویلایی معبد سورنا بلند (6)
-

چراغ ویلایی معبد سورن کوتاه طرحدار (6)
-

چراغ ویلایی معبد سورن کوتاه (6)
-

چراغ ویلایی معبد سورن بلند طرحدار (6)
-

چراغ ویلایی معبد سورن بلند (6)
-

چراغ ویلایی معبد رابو کمرباریک (6)
-

چراغ ویلایی معبد رابو خمرهای (6)
-

چراغ ویلایی معبد رابو (6)
-

چراغ ویلایی کلبه (5)
-

چراغ ویلایی سورنا کوتاه طرحدار (6)
-

چراغ ویلایی سورنا کوتاه (6)
-

چراغ ویلایی سورنا بلند طرحدار (6)
-

چراغ ویلایی سورنا بلند (6)
-

چراغ ویلایی سورن کوتاه طرحدار (6)
-

چراغ ویلایی سورن کوتاه (6)
-

چراغ ویلایی سورن بلند طرحدار (6)
-

چراغ ویلایی سورن بلند (6)
-

چراغ ویلایی روبینا (6)
-

چراغ ویلایی رابو کمرباریک (6)
-

چراغ ویلایی رابو خمرهای (6)
-

چراغ ویلایی رابو (6)
-

چراغ ویلایی پالیز (6)
-

چراغ ویلایی پادینا طرحدار (6)
-

چراغ ویلایی پادینا (6)
-

چراغ ویلایی پادرا (5)
-

چراغ ویلایی آیسان (6)
-

چراغ ویلایی آرتمیس (6)
Buying garden and villa area lights suits anyone who wants to light the outdoor space of their home, garden or villa with beautiful, durable and professional lighting. Takshidfam products, with die-cast aluminum bodies, UV-protected polycarbonate globes and electrostatic powder coating, are supplied directly from the factory with no middlemen. We offer both classic and modern styles to match any type of architecture.
A product installed in garden and villa grounds needs several key features: resistance to the elements, high durability without frequent repairs, a design that suits the space, and a fair price, which comes from buying directly from the manufacturer.
Technical Features: A Guide to Buying Garden and Villa Area Lights
01 — Die-cast aluminum body, strong and easily shaped
A die-cast aluminum body is the best choice for garden and villa area products. Compared with iron, this material does not rust, is lighter and highly formable, which makes it possible to create a wide variety of classic and modern designs.
02 — Electrostatic powder coating, double protection
Electrostatic powder coating creates a double protective layer on this body that does not peel for years and keeps the product looking fresh.
03 — UV-protected polycarbonate globe
A UV-protected polycarbonate globe resists the yellowing and brittleness caused by direct sunlight and keeps light transmission clear for years, unaffected by humidity or ultraviolet radiation.
04 — Classic or modern design
If your villa or garden has classic, traditional architecture, classic models with ornamental designs and grand forms are the better choice. If your architecture is modern and minimal, modern models with simple lines and neutral colors work better.
Guide to Buying the Right Garden and Villa Area Light
The number and type of lights depend on the size of the grounds, the garden design and the amount of light you need. A combination of pole, lawn and wall lights usually gives the best result.
Buying directly from the manufacturer removes the middleman and gets you a quality product at a better price. Ordering in your preferred color with electrostatic coating is also possible. To see other models, visit the villa lights page. For other lighting products, visit the Takshidfam home page.
Buy This Product with Free Consultation and Factory Prices
Zoning the grounds: the first step before choosing lights
A garden and villa is not a single space; it is a set of several areas, each with a different job at night. If you buy garden and villa area lights without this separation and based only on square meters, some places end up too bright and some corners stay dark. On a simple sketch, separate the six zones below and decide for each one separately.
Six zones and the right garden and villa area light for each
Entrance and gateway
The entrance is a guest’s first image of the property and must be visible from outside too. A pair of lights on the pillars on either side of the gate lights the house number and lock and shows the face of whoever is standing at the door. Gate post lights are made for this spot; match their size to the pillar diameter and gate height so they do not look small or heavy.
Driveway
The driver must be able to see the edge of the drive, the bends and the parking spot without light shining into their eyes. For this, garden and villa area lights about two to three meters tall, on one side of the drive or staggered on both sides, are a good solution. On short driveways, a few low lights at the edge of the flower beds are enough, as long as they are kept away from the wheel path.
Footpaths and steps
On footpaths the goal is to see the ground, not to light the whole garden. Low lawn lights, usually under one meter tall, cast light onto the paving and keep the garden’s night sky dark and calm. Steps, small bridges and every change in level need their own light; most nighttime falls happen right here.
Seating, gazebo and poolside
Where you sit needs low, warm light. In this area a garden and villa area light is best placed to shine from the side or from behind, not from the front. Under the roof of a gazebo or pergola you can use a pendant light and place a few low lights around it. Near the pool, install the light farther from the water’s edge and with a reliable earth connection.
Trees and plants
An old tree, a row of cypresses or a flowering shrub can become a focal point of the garden at night. When placing garden and villa area lights near trees, do not put them so close to the trunk that roots and irrigation damage them, and allow for several years of branch growth. In an orchard, keep poles away from the path of gardening equipment.
Façade and building walls
The villa’s façade is the backdrop of the entire grounds. Both sides of the front door, beside tall windows, the terrace and the garage wall are natural places for a wall light. The mounting height is usually set slightly above eye level so the façade is visible and light does not shine into the rooms.
Unity of style: classic or modern?
The biggest visual mistake is buying each zone from a different family. When the garden and villa area lights at the gateway, along the path and on the façade share one design language, even a simple yard looks coherent and well thought out.
- For brick, stone and pitched-roof villas, the classic line with die-cast aluminum bodies and polycarbonate or glass globes is more harmonious.
- For contemporary architecture with straight lines and plain surfaces, the modern line with LED light sources and aluminum bodies is the more natural choice.
- Keep the body color and light color the same in all zones; Takshidfam’s option to order custom colors and dimensions makes this harmony easy.
You can see matching models side by side on the villa lights page and choose the pole, wall or gate post version of the same design for each zone.
Lighting control: photocells, timers and separate circuits
A villa you only visit at weekends should not stay lit with every light each night, nor should it be completely dark. With a few simple tools, garden and villa area lights can be automated:
- Photocell: switches the light on at dusk and off at sunrise; suitable for the gateway and main path, which should always be visible.
- Timer: limits the lighting hours, for example from sunset until the time you usually go to bed. Useful for seating areas and tree lighting.
- Motion sensor: in the parking area and behind the building, it both reduces consumption and helps security.
The condition for using these tools is that the zones are on separate circuits. Ask your electrician to run at least three independent lines: one for the entrance and path, one for seating and green spaces, and one for the façade. This way you control each area separately, and while you are away only the security line stays on.
If you have prepared a sketch of the grounds and a photo of the façade, send them to Takshidfam’s experts via the contact page to get guidance on the number and height of garden and villa area lights in each zone. An 18-month warranty and spare parts supply for up to 10 years also back this choice.
A hypothetical example: a lighting plan for a medium-sized garden villa
General rules are better understood when applied to an example. What follows is an imaginary, purely educational example, not a prescription for every property; the actual number of garden and villa area lights in each project depends on the shape of the land, the planting and the owner’s taste.
Imagine a garden of about a thousand square meters with the building in the far third, a driveway of nearly twenty-five meters from the gate to the parking, a paved footpath circling the central flower bed, a gazebo in one corner and a few old fruit trees.
Approximate count in this example
- Gateway: two lights on the entrance gate pillars.
- Driveway: three to four medium-height poles on one side of the drive, spaced about eight meters apart.
- Footpath: about eight to ten low lights from the garden and lawn lights family, spaced about five meters apart, with one at each bend and step.
- Gazebo: one pendant light under the roof and two low lights beside its entrance.
- Building façade: four to six wall lights on both sides of the door, the terrace and the garage wall.
- Feature trees: two or three accent light points, which can be left for a later phase.
This list adds up to about twenty to twenty-five light points, and if the same garden had a high wall or a steep slope, the numbers would shift. The value of the example is not in the number itself; it is in seeing that garden and villa area lighting is made up of several small groups, each of which can be bought and installed separately.
Phasing the budget: where to start?
Everything does not have to be bought in one season. The condition for proper phasing is that the infrastructure is installed once and completely, and lights are added gradually. This order makes sense for buying villa grounds lighting in most gardens:
- Step one, infrastructure and essentials: conduits for all routes, even for points that have no light yet, together with the gateway and driveway, which concern safety and security.
- Step two, footpaths and façade: the areas you use every night.
- Step three, seating and plant lighting: the areas that add charm to the space and can wait until next year.
When buying in phases, note the model name and color of each garden and villa area light so you can order from the same family next time. Lights in one continuous row are best bought together so slight color differences between two production runs are not noticeable.
Trenching and cable routes in a planted garden
On empty land any cable route is possible, but in a garden with trees and lawn, every trench runs into roots and water pipes. Before digging for garden and villa area lights, draw the routes on a sketch and keep these points in mind:
- Run the trench along the edges of paths and flower bed curbs as far as possible, not through the lawn; it is easier to repair and you will remember where the cable is later.
- Keep away from the base of old trees. Cutting thick roots weakens a tree; if there is no alternative to passing through, dig that section by hand and patiently.
- Lay sleeve conduits under paving and the driveway so the surface does not have to be broken again to add cable.
- At a few distant points, such as the end of the garden or beside a pool you might build later, bring out the end of an empty conduit and cap it.
- Before backfilling the trench, photograph the route and note its distance from a fixed landmark such as a wall.
Burial depth, cable type and circuit protection are determined by a skilled electrician. Your part as the owner is to make sure the cable route of the garden and villa area lights fits the planting plan and the garden’s future plans.
Coordinating with irrigation and landscaping
The best time to install garden and villa area lights is before the lawn is planted and at the same time as the irrigation piping. While the trenches are open, the electrician and the irrigation installer see the routes together and lay the power cable at a distance from the water pipe and in a separate sleeve.
- Mark the positions of sprinklers and drippers before placing the poles so water does not spray directly onto the light body.
- Backfilling and final grading raise the ground level; set the height of the pole’s concrete plinth to the finished level of the flower bed, not to today’s soil.
- Get the base plate dimensions and bolt spacing of the garden and villa area lights from the manufacturer before pouring concrete.
- Mount the lights after heavy work such as moving soil and laying stone is finished, so they are not damaged by wheelbarrows and vehicles coming and going.
Night test and final adjustment
However accurate the plan, the final judgment is made by eye and in the dark. Before tightening all the screws and filling the last trench, dedicate one night to testing the garden and villa area lights and follow this route:
- Drive in through the gate and see whether any light shines into the driver’s eyes.
- Walk the footpath and pay attention to steps and bends; wherever you hesitate involuntarily, the light is too low.
- Sit in the gazebo and on the terrace. If a light source is directly in view, move the light slightly or fit a lower-wattage lamp.
- Look outside from inside the rooms; light should not shine into the bedroom.
- Take a look from the street and from the neighbor’s side too.
In classic models with an E27 socket, adjusting the intensity is simple, because the lamp can be swapped for one with a different wattage or light color. Write the test results on the sketch so that if you want to extend the garden and villa area lighting next year, you can use this experience.
Care through the seasons
A garden is alive, and each season creates new conditions for garden and villa area lights. A few small, timely tasks prevent major repairs:
- Spring: prune new shoots that have grown in front of the light, and after spraying and fertilizing, wipe the bodies of lights near trees with a damp cloth.
- Summer: check the sprinkler angles and remove white water deposits from the globe before they harden.
- Autumn: clear leaves from the base of the poles, and if the villa stays empty in winter, set the timer for the long nights.
- Winter: after heavy snow, clear the snow from low lights and be careful the shovel does not hit the globe.
To review matching models and heights, download the catalog and price list. If you have a sketch of your garden ready, send it via the contact page and get advice on the number of garden and villa area lights in each group. Takshidfam products carry an 18-month warranty, and their spare parts are supplied for up to 10 years.
Frequently Asked Questions about Garden and Villa Area Lights
It depends on the size of the grounds, the garden design and the amount of light you need. A combination of pole, lawn and wall lights usually gives the best result. Contact us for a free consultation and we will design the best lighting plan for you.
Yes, all our area products are designed with a suitable IP rating for outdoor use and are fully resistant to rain, humidity and temperature changes. For rainy regions such as northern Iran, IP65 is recommended.
Our products, with die-cast aluminum bodies and electrostatic powder coating, last more than 10 years under normal conditions. They do not rust, their paint does not peel, and they are fully resistant to humidity and temperature changes.
Yes, with electrostatic powder coating, production in your preferred color is possible. Specify your desired color when ordering and we will produce exactly that.
The classic model has an ornamental design and grand form and is better suited to traditional architecture; the modern model, with simple lines and neutral colors, is designed for contemporary spaces. Both are made with the same die-cast aluminum quality.
Yes, we ship to all parts of Iran. Contact us for shipping costs and times.









































